APS Wallmount Power Distribution
Configurable Power Distribution
Powering a large number of LED screen panels, audio amplifiers or moving lights can be problematic. The APS delivers an elegant solution by sequentially switching the outputs and controlling large inrush currents, earth leakages and overloads.
Choice of circuit output capacity, number of circuits per unit, output connector styles and 3-phase or single-phase operation. The unit can be 19″ rack-mounted for portable use or wall-mounted for permanent installations – versatility plus for any situation!
In addition to the front panel set-up for stand-alone mode, the APS can be remotely controlled via DMX512 signals, GPI voltage free contact closure for remote triggering and Remote Device Management (RDM) to switch units off and on.
|Control||3.2″ colour LCD with touchscreen programmable stand-alone mode via easy-to-use menus
DMX512 (1990) or DMX512-A (E1-11) input with RDM (E1-20) functionality on 5-pin XLR connectors
GPI voltage free contact closure on 5-pin XLR connectors (using pins 1+4)
|Protection||12 channel x 10A RCBO breakers with 30mA trip per channel | 6 channel x 25A RCBO breakers with 30mA trip per channel
dropped neutral protection with almost instant load disconnect
programmable channel sequential start-up time delay
cascading start-up between multiple units
programmable min and max voltage cut-off per phase
3-phase voltage and current levels monitoring on main display
remote configuration and monitoring via RDM protocol
remote configuration and monitoring via LSC’s HOUSTON X software
|Power||nominal 100-240V, 3-phase star, 50-60Hz (single-phase operation possible, 63A maximum)
operating range typically 90-260V, 45-65Hz
all models supplied with L1, L2, L3, N, and E terminals for power connection
490mm (w) x 270mm (d) x 250mm (h)
full metal two-part hinged chassis with rear-screened polycarbonate labels
touchscreen, dimmer output connectors, RCBOs located on front panel
DMX input and GPI input located on right side panel
input power terminals housed internally, optional cable gland to allow flying tail to be connected
|Piece of Mind||CE (European) and RCM (Australian) approved
designed and manufactured in Australia by LSC – an Australian-owned company with over 40 years’ experience in developing world-first products
Contact Us today for larger orders or for more product information check out the LSC website here
There are no reviews yet.