The optoLED Pixel Strobe is a DMX controlled string of high brightness LED strobes with multiple effects. Control rate, duration, decay and pattern all from just a few control channels, or put it into Mapping mode and control each strobe individually straight from a lighting console. Customise the quantity from just a few up to 20 Strobes from just one Controller or add a PS Power Booster to increase to a maximum of 70 strobes per line.
Each strobe has locking input and output connectors making installation and maintenance easy, and each unit comes with a 1m link cable.
Strobes are connected via a single pluggable cable run to the controller, daisy chaining power and data through each strobe fixture allowing flexible placement and easy installation. Pixel Strobes are light enough to cable tie onto pipe or truss, but also come with a solid yoke with a M10 mounting hole for bolt or clamp attachments.
The optoLED Pixel Strobes are powered by a multipurpose DMX controller, the MOD-CTRL/1.
Designed and built to stand up to the rigorous touring of today’s live events, the optoLED Pixel Strobe is light weight, tiny, tough and importantly… bright!
|85 x 85 x 45
|45 x 128 x 145
|Controller – 450g
PSU – 350g
|12VDC, from controller
|100-240VAC 50/60Hz 1.7A
|2 x 6-pin Molex, for input/output
|DC input – 2-pin Phoenix
DMX in/thru – 5-pin Neutrik XLR
Strobe output – 6-pin Molex
|DMX addressing, strobe count and configuration via DIP switches
|M10 hole through yoke
|M3 T slots, with safety chain loop
|7 DMX channels
|6500K 3W COB
|0.19Hz to 20Hz, 10ms to 500ms duration