QolorFLEX® 2×2.5A Multiverse® Dimmer
QolorFLEX® 2×2.5A Multiverse® Dimmers are small, constant voltage, two-output dimmer designed to be mounted in small spaces such as props, costumes, wands, and candles. They can be controlled wirelessly using City Theatrical’s Multiverse or SHoW DMX Neo wireless DMX/RDM technology, or with wired DMX.
Similar to City Theatrical’s QolorFLEX 5×2.5A Multiverse Dimmers, these dimmers provide 20-bit PWM resolution and 8-bit or 16-bit control for extremely smooth dimming at the low end of the dimming curve. Configuration is performed using RDM, such as with a City Theatrical DMXcat®, or with City Theatrical’s USB Configuration program for PC/MAC (available on the City Theatrical website).
A plastic case is included with the QolorFLEX 2×2.5A Multiverse Dimmer to allow easy mounting to scenery while enabling removal of the dimmer from the case for wiring and configuration.
The dimmer is designed and built in the USA by City Theatrical.
For full specifications check out the City Theatrical product page here
|Product Name||QolorFLEX® 2×2.5A
2.4GHz Multiverse® Dimmer
|Cut Sheet||5916 Cut Sheet|
|Length (with plastic case)||10.8 cm (4.25 in)|
|Width (with plastic case)||2.5 cm (1.0 in)|
|Height (with plastic case)||1.6 cm (0.63 in)|
|Size of Bare Circuit Board||81mm (3.2”) x 19mm (0.74”) x 10mm (0.38”) H|
|Weight||0.02 kg (0.05 lbs.)|
|Operating Temperature||0ºC to 40ºC|
|Construction||NEMA 4 IP20 ABS Plastic|
|Connectors||Low profile latch connectors|
|Mounting||Screw holes in tabs on ends of plastic case|
|Voltage Range||5 – 30 VDC|
|PWM Frequencies (Hz)||60, 1.2K, 2.4K, 5K, 12K, 24K, 50K|
|Power||4A/channel maximum; 5A total|
|Control Resolution||8-bit; 16-bit|
|Broadcast Power||Antenna dependent; 100mW EIRP|
|Broadcast Modes||Adaptive, Full, Low, Mid, High, Max|
|SHoW IDs||Multiverse: 147; Neo: 70|
|Antenna||Internal, plus connector for external antenna|
|RDM Features||RDM Proxy, RDM Responder|
|Firmware||User updatable via USB|
|Compliance||CE, RoHS, FCC, AU, Japan, IC||RoHS, FCC, IC|